48V Volt Challenger X 3 wheel scooter Charger XLR Fast Charge

Description

Will not work if you swapped to lithium or lifepo4, factory sealed lead acid, gel or agm is fine!
48V XLR With "Intelligent" Technology with the proper polarity for the Challenger X 3 wheel mobility scooter.
This charger has a built in fan with venting on the sides (others listed have no fan and have less amp output)..
With the "Intelligent" Technology this charger will safely charge your batteries at the fastest,safest rate that the charger sees fit without overcharging and causing damage,which saves the cycle-life of your batteries..These are very nice chargers and sell out fast,We have a limited supply so get them while you can its truly a very nice charger and the price is also nice!
This is a Fast Scooters 48 volt 3 prong xlr inline charger used for many E Bikes and scooters..Not for lipo batteries. For use with standard AGM/SLA batteries..
These will work with any 48 volt unit with the 3 prong inline xlr charger as pictured above.Unlike others out there these Intelligent Chargers...These are a much better charger than others available hands down..
Its charges fast with a built in fan and is a really nice upgrade to any stock charger you may have.
These are all tested and the output marked on the back of the charger which everyone puts out over 55 Volts!
They are not noisey like others as the fan runs very smooth..It charges at a safe rate of 2.5 amps.So your not going to effect your run time.
Limited amount available.
Always check your scooters power polarity/positive and negative..This has a quick access panel on the back to quickly swap the polarity without taking apart the whole charger..